Cold Bend Testing Machine (6~50mm Dia.)
- Used for bending & re-bending reinforced concrete bar, the machine is mainly composed of transmission parts, racks, table & screw adjustment device, equipped with protective enclosures.
- Supplied with bar puller and tool kit set.
- The machine can perform two types of test:
- bending the specimen through 180° only with mandrels up to max. 96mm included.
- bending the specimen through 90° and then straightening it again up to a minimum of 20° with mandrels over 96mm dia.
- NL 6001 X / 005
Description
Cold Test Bending
Used for bending & re-bending reinforced concrete bar, the machine is mainly composed of transmission parts, racks, table & screw adjustment device, equipped with protective enclosures. Supplied with bar puller and tool kit set.
The machine can perform two types of test:
bending the specimen through 180° only with mandrels up to max. 96mm included.
bending the specimen through 90° and then straightening it again up to a minimum of 20° with mandrels over 96mm dia
Technical Specifications
| Model Number | NL 6001 X / 005 |
| Specimen Diameter | 6 – 50 mm |
| Max. Force | 160 kN |
| Max.Specimen Length | 800 mm |
| Max. Bending Angle | 0° – 180° |
| Max. Re-Bending Angle | 90°- 120° |
| Piston Speed | 200 mm/min |
| Max. Piston Stroke | 400 mm |
| Dimension | 1550 (L) x 900 (W) x 1050 (H) mm |
| Approx. Weight | 400 kg |
| Power | 415 V, 3 ph, 1.1 KW 50/60 Hz, 1.99A |
For detailed specifications refer to the Product Brochure.
NL SCIENTIFIC
Cold Bend Testing Machine (6~50mm Dia.)
Used for bending & re-bending reinforced concrete bar, the machine is mainly composed of transmission parts, racks, table & screw adjustment device, equipped with protective enclosures. Supplied with bar puller and tool kit set
You must be logged in to post a review.
Out Stock 
Reviews
There are no reviews yet.