BriCyte E6 Flow Cytometer
The BriCyte E6 cytometer system is equipped with dual-laser based optics. A red diode laser and a blue diode laser are used for exciting 4 to 6 colors of fluorescence lights.
The optics are designed with state-of-the-art technology to ensure higher sensitivity for a better identification of cellular populations.
The voltage can be adjusted and optimized conveniently by easily dragging the “hand” on the scattergram.
BriCyte E6 can automatically compensate and gate the clusters of cells by built-in algorithms.
With the advanced microfluidic detector, BriCyte E6 can count the absolute number of cells for every sample without extra beads, thereby reducing running costs.
Description
Convenicent voltage adjusting
The voltage of BriCyte E6 could be adjusted and optimized conveniently by easily dragging the “hand” on the scattergram.
Automatic compensating
BriCyte E6 can automatically compensate the clusters of cells by one simple click of the built-in intelligent template.
Automatic gating, analyzing & reporting
BriCyte E6 can gate the clusters of cells by the built-in algorithms, then it analyzes the data and reports the results automatically. Currently this feature is for Mindray reagents only.
Microfluidic detector
The microfluidic detector is an advanced technology of BriCyte E6. With the microfluidic detector, BriCyte E6 can count the absolute number of cells for every sample without extra beads, which can reduce the running cost of BriCyte E6.
Reagents weight sensor
The sheath fluid and waste could be placed on the weight sensors which are able to measure the residual volume of reagents. With such design, the BriCyte E6 can sound an alarm before the reagents run out to minimize the dead volume.
2 loading modes
BriCyte E6 has single tube mode which suits the labs which have less number of samples, the micro sample tubes are supported as well. The carrousel mode is yet another option which can handle 40 sample tubes at one time.
STAT position
In the carrousel mode, single sample tube can also be loaded as STAT after opening the cap of carrousel.
LIS connection
All information, including sample results as well as patient information, could be transmitted bi-directionally between BriCyte E6 and the Laboratory’s LIS.
Easy maintenance
The maintenance is easy as well. The users just need to aspirate the diluted probe cleanser through the sample probe once per day, then BriCyte E6 will clean the whole system automatically, in several minutes.
Technical Specifications
| Lasers | Blue solid state diode (488nm, 43mW), Red solid state diode (638nm, 55mW) |
| Detectors | FSC, SSC, FITC, PE, PerCP/PerCP-Cy5 or ECD/PI, APC, PE-Cy7, APC-Cy7 |
| Fluorescence sensitivity | PE<100 MESF, FITC<200 MESF |
| Fluorescence precision | FSC≤2.0%, FITC, PE≤2.0%, PerCP, PE-Cy7, APC, APC-Cy7≤4.0% |
| Scatter resolution | FSC≤1.0 μm, SSC≤0.5 μm |
| Maximum acquisition rate | 12,000 events per second |
| Throughput | Up to 90 tubes per hour |
| Loading mode | Open mode & Carrousel mode (40 sample tube positions) |
| Flow rate | 10μL sample per minute (low) 50μL sample per minute (medium) 100μL sample per minute (high) |
| Sample carryover | ≤0.1% |
| Size of detecting capability | 0.5-50μm |
| Minimum sample volume | 100μL |
For detailed specifications refer to the Product Brochure.
Mindray
BriCyte E6 Flow Cytometer
BriCyte E6 is equipped with dual-laser based optics. A red diode laser and a blue diode laser are used for exciting 4 to 6 colors of fluorescence lights. The optics are designed with state-of-the-art technology to ensure higher sensitivity for a better identi cation of cellular populations.
Shop