Soil
-
Vibrating Compaction Hammer
The hammer is used for compacting of Proctor and CBR Soil specimen. By changing appropriate tamping foot,it also can be used for compacting concrete cube or beam specimens and compacting asphalt in the percentage refusal density test (PRD Test). Supplied… -
Universal Loading Frame
Special design for low capacity to carry compression test such as triaxial, unconfined and etc. Code : NL 5019X/001 Inquiry Now! -
Universal Extruder
Allow the marshall CBR and proctor sample 4”, 6”, 100 mm and 150 mm to be easily removed from the mould. Standard: ASTM D698/D1587/D1883, BS 598-107/1377-4/1924-2 Inquiry Now! -
Universal Extruder
Allow the marshall CBR and proctor sample 4”, 6”, 100 mm and 150 mm to be easily removed from the mould. NL 5036 X / 002</span Inquiry Now! -
Surface Soil Sample Apparatus
Used to take samples of compacted fill or undisturbed soils and to evaluate density of compaction samples as the ground surface. Code : NL 5022X/001&002 Inquiry Now! -
Soil Sampling Apparatus
In-Situ Sampling & Preparation The Kit contains a range of selected item for boring and sampling up to 150 mm diameter. Code : NL 5042X / 001 Inquiry Now! -
Soil Sampler Apparatus
Used to obtain samples that adequately represent each surface material that is significant to the project design and construction. The apparatus complete with T – Handle with extension rod. Code : NL 5020X/001 Inquiry Now! -
Soil Lathe Apparatus
Category : Soil Testing Equipments Code : NL 5063 X / 001 This unit multi size soil lathe able to trim specimen diameter for 35 mm to 101.6 mm. Inquiry Now! -
Soil Colour Chart
The set consists of 7 constant hue charts on a neutral grey chart stock. Apertures cut between adjacent colours facilitate viewing so that the soil sample may be evaluated directly against the standard colours. Included in the set is a… -
Shrinkage Limit Set (7items)(NL50.30X0.01)
The Shrinkage Limit Set consists of a selection of items needed to perform shrinkage limit testing, per ASTM and AASHTO testing standards. Inquiry Now! -
Sand Pouring Cylinder Set
Sand Replacement Method Used to determine the in-situ density of fine grained compacted soil. The tests consists in digging a hole into the ground and then collect, dry and weigh the sampled soil. code : NL 5017X Inquiry Now! -
Sand Density Cone Apparatus (6″ Diameter)
The Sand Density Cone and accessories are used for determination of the in-situ (in-place) density of soils. The apparatus is restricted to tests in soils containing particles not larger than 2" (50.8 mm) in diameter. Code : NL 5015X/001 Inquiry… -
Sample Tube Extruder Ø38 mm
This Sample Tube Extruder comprise a vertically mounted, level action, hydraulic jack with the body extended to form a chamber which accommodate standard 38mm diameter sample. Code : NL 5039 X/ 001 Inquiry Now! -
Relative Density Apparatus
This method covers the determination of the maximum dry density and water content of cohesionless materials when compacted using a vibrating table. Code : NL 5033X/001 Inquiry Now! -
Proving Ring Penetrometer
The apparatus used to determine the bearing strength, compaction degree of sub grades and determining the penetration resistance of soil. Code : NL 5012X/001 Inquiry Now! -
Proctor Test Apparatus
All compaction equipment manufacture from platen heavy duty steel to protect against corrosion and rusty. Standard : BS 1377/1924, ASTM D558/698/, AASHTO T99/T134, EN 13286-2 Inquiry Now! -
Proctor Penetrometer Apparatus
Used to determine the setting time of the mortar fraction in concrete mixes with slump greater than zero, by testing mortar sieved from mix. Code : NL5028X/001 Inquiry Now! -
Pocket Shear Vane Device
A scientifically designed soil testing instrument for the rapid determination of shear strength of cohesive soils, either in the field or in the laboratory. It permits the determination of a large number of strength values with different orientation of failure… -
Pocket Penetrometer (Soil)
For used to obtain quickly and easily an approximate measure of the shear strength of cohesive and semicohesive soils. Direct-reading scale in kgf/cm² - corresponds to equivalent unconfined compresive strength. Indicator sleeve ratains reading after piston is release. Code :… -
Plate Bearing Equipment
Plate Bearing Equipment is used to estimate the bearing capacity of a soil under field loading condition. Code : NL 5010X /002 Inquiry Now! -
Plastic Limit Set
The Plastic Limit Set consists of a selection of equipment required to perform the plastic limit test in accordance with ASTM and AASHTO specifications. Code : NL 5031X/001 Inquiry Now! -
Peat Auger Set
NL Peat Auger Set for sampling peats and soft clays comes complete with accessories allowing sampling down to a depth of 10 meters in suitable conditions. Supplied in a strong transit carry case. Code : NL 5038 X / 001… -
Particle Size Analysis Of Soil Apparatus
To determine the particle size distribution of very fine materials such as silt and clay. To perform the test the following apparatus is required which can be selected as single items or grouped in a complete set. Code : NL… -
Organic Impurities Test Apparatus
This test method cover procedures for an approximate of the presence of injurious organic impurities in fine aggregate. Code:NL 5054X/001 Inquiry Now!
Shop